CellarPro CP 4000S WATER Cooled Wine Cellar Cooling Unit

ROSEHILL RESERVES THE RIGHT TO CONTACT YOU PRIOR TO PROCESSING YOUR ORDER IN REGARDS TO SHIPPING OVERSIZED ITEMS.

CellarPro's 4000S 220V 1/3 Ton Nominal cooling units are suitable for wine cellars up to 21 cubic meters in both commercial and residential wine cellars. The 21 cubic feet cellar size assumes that the cellar is constructed with insulation of R19 or better in all walls and ceiling (ie no glass or uninsulated concrete), the cooling unit is not ducted, a setpoint of 13C inside the cellar and ambient temperatures up to 27C outside the cellar.

Performance testing shows that this unit maintains optimal cellar temperature and humidity conditions in extreme conditions up to 43C more effectively than similar units from competing brands. 4000S 220V units also are significantly quieter than comparable units from other brands.

This unit may be used in North America as well as overseas markets. Visit our Learning Center for data tables, performance charts and product comparisons among different brands.

The Evaporator can be remotely located and ducted to/from the cellar using our cold-side duct hood, or located inside the cellar (with or without a decorative grill - not included.)

Power/Rating:
220V AC 50/60 Hz

Condensing Unit Dimensions:
- 20.4 kg
- 34.3w x 48d x 23h (cm)
Evaporator Unit Dimensions:
- 18.1 kg
- 36w x 32d x 50h (cm)

***** Additional Information *****

Please specify if you want the Solenoid Valve or Electronic Control for the Cellar Pro Split systems.

• Solenoid Valve - typically used indoors. There is a separate controller for the evaporator and the condensor. 
• Electronic Control - Mandatory if the condensor will be placed in a cold environment or the condensor will be managed by the evaporator. 

Specifications:

• Condenser Operating Temperature Range: 0°F to 110°F
• Certified by ETL to UL standards
• Active Humidity Control
• Digital Controls (LED Display)
• 115V AC / 60Hz
• Auto-Defrost Cycle
• Electronic Thermostat
• Energy-Saver Mode
• Quick-Chill Mode
• Audible and Visual Alarms
• Min/Max Temperature
• Maintenance-Needed Indicator
• Power On/Off Switch

Inside the cellar, the evaporator unit is designed to mount on the wall near the top of the wine cellar. Outside the cellar, the condensing unit is attached to the evaporator unit by a line-set (sold separately) up to 100 equivalent feet.

ALL Cellar Pro Split systems are available with optional exterior hood which allows the condensing units to be installed in external environments, subject to the temperature range noted above. Please inquire.

Exposure to temperatures below 40°F requires the addition of our low ambient heater kit. The split systems are not shipped with the fan cycling switch required for low temperatures.  On its own, the cooling unit will function in environments above 40F/4C.  If your condenser will be in and environment below 40F/4C and approaching as low as  -20F/ -28C  you require the Low Ambient Heater kit.  The kit includes both the compressor heater and the fan cycling switch. 

Amps at High Fan -

• CP 3000S - 6.6amps
• CP 4000S - 8.9amps
• CP 6000S - 13.8amps
• CP 8000S - 15.4amps

NOTE: Cellar Pro's Split evaporators use the same variable speed fans and advanced controls that we use in our VS Series through-the-wall cooling units. As a result, their Split systems provide super-quiet operation, outstanding cooling power and adjustable humidity control that our competitors can't match.

CellarPro wine cellar cooling units are greatly reliable cellar coolers made in the United States of America. CellarPro LLC is situated in Cotati, CA, California, 94931 USA.  Available for shipping throughout the US and Canada.

Cellar Pro options are shipped at no charge as long as they are ordered with main Cellar Pro unit.

 

***** Warranty *****

Celling Mounted Split System Owner's Manual
Wall Mounted Split System Owner's Manual
Water Cooled Split System Owner's Manual

Split System Spec Sheet

Split System Condensing Unit Cut Sheets
Split System Evaporator Cut Sheets

Cellar Pro Standard Warranty

Split System Check List

Split System Configuration Options

NOTE: Be sure to have the installing technician complete the CellarPro checklist upon installation. You will then send this to Cellar Pro to activate your warranty.

1 Year (Entire System) To activate your warranty, you must complete and return our Split Installation Checklist. Optional Extended Warranty sold separately. Limited Warranty Policy 1800 QTL / QT / XT / XTS (110V Models): For five years from the date of purchase, your CellarPro warranty covers all parts and labor to repair or replace any components in the wine cooling unit that prove to be defective in materials or workmanship. Click here for information about our extended warranty. 1800 XT-220V, 1800 XTx-220V, 1800XTS 220V: For two years from the date of purchase, your CellarPro warranty covers all parts and labor to repair or replace any components in the wine cooling unit that prove to be defective in materials or workmanship. 1800H Houdini, 1800 XTSx, 2000 VSi/VSx, 3200 VSi/VSx, 4200 VSi/VSx, 6200 VSi/VSx, 8200 VSi/VSx (110V Models): For five years from the date of purchase, your CellarPro warranty covers the internal compressor if it proves to be defective in materials or workmanship. In addition, for two years from the date of purchase, your CellarPro warranty covers all parts and labor to repair or replace any components in the wine cooling unit that prove to be defective in materials or workmanship. Click here for information about our extended warranty. 1800H Houdini 220V, 2000VS 220V, 3000S 220V, 4000S 220V / 4200VSi/VSx 220V: For one year from the date of purchase, your CellarPro warranty covers all parts and labor to repair or replace any components in the wine cooling unit that prove to be defective in materials or workmanship. Split Systems (115V Models), Air Handlers: For five years from the date of purchase, your CellarPro warranty covers the internal compressor if it proves to be defective in materials or workmanship. In addition, for two years from the date of original delivery, your CellarPro warranty covers all parts and labor to repair or replace any components in the wine cooling unit that prove to be defective in materials or workmanship. For all split systems, the warranty will not be activated until the Warranty Activation Checklist has been completed and submitted to CellarPro. The warranty period starts from the time of purchase, regardless of the time of activation. For all products covered by the terms of this warranty, CellarPro will repair or replace the original cooling unit with a new or refurbished cooling unit and, once replaced, the original cooling unit must be returned to CellarPro. All service provided by CellarPro under the above warranty must be performed by CellarPro or a designated repair facility unless otherwise specified by CellarPro. Purchaser is responsible for shipping the wine cooling unit to and from CellarPro or to and from a designated repair facility, and for removing and reinstalling the wine cooling unit from the wine cellar. The limited warranty applies only to wine cooling units purchased from the factory or an authorized dealer. Damage caused by others or by any cause beyond the control of CellarPro, shall not be considered defects in material or workmanship and are not covered by the warranty. The limited warranty does not cover any parts or labor to correct any defect caused by negligence, commercial use, accident or improper use, maintenance, installation, service or repair. THE REMEDIES DESCRIBED ABOVE FOR EACH WARRANTY ARE THE ONLY ONES, WHICH CELLARPRO WILL PROVIDE, EITHER UNDER THESE WARRANTIES OR UNDER ANY WARRANTY ARISING BY OPERATION OF LAW. CELLARPRO WILL NOT BE RESPONSIBLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM THE BREACH OF THESE WARRANTIES OR ANY OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other legal rights, which vary from state to state. To receive parts and/or service and the name of a CellarPro designated repair facility nearest you, contact your CellarPro dealer. You may also contact CellarPro directly by calling us at 1.877.726.8496.