CAD
COLLECTION BLACK PEARL
This built-in wine cellar with full glass door can hold up to 46 bottles*. With its double temperature zone and its compressor, one of the quietest on the market, it is the ideal service cellar. Its 5 ball bearing sliding shelves allow you to see all the bottles. Its side LED strips will highlight your most beautiful bottles and make your wine cellar a key element in the design of any room. Also equipped with a door alarm, it will notify you, by the emission of a ”beep” sound, if the door is not closed properly.
Spec. Sheet : WC46FGDZ6_EN
- Black Glass Door (NOT FULL GLASS as indicated on Spec Sheet)
- 46 Bottle Capacity (750mL)
- NO lock
- Door Alarm
- LED side lighting
- Dual Zone Temperature control
- Features an electronic touch screen panel inside the cabinet
- Equipped with two cold plates, ensures that the two separate zones maintain temperatures
- 34 3/8" H x 23 1/2" W x 22 1/2" D
***** Warranty *****
Warranty:
- 2 year warranty parts & labor (on most models)
- 3 years on compressor
Wine CellR Cabinet Specification Sheets:
WC18 FGBK5
WC26 SBDZ5
WC26 SSTDZ5
WC32 FGB5
WC34 PLSZ5
WC34 PLSZ
WC38 SSTBC5
WC38 SSDZBC
WC46 FGDZ5
WC46 SSTDZ5
WC46 SSTSZ5
WC46 SBDZ5
WC54 SSTBC5
WC94 FGB5
WC152PLBC
WC166 SSDZ5
WC181 SSSZ5
WC194 FGB5
If your Wine CellR is equipped with the Silent Mode – Please see instructions.
Wine CellR Instruction Manuals
Instruction manual for WC34PLSZ5, WC38SSTBC5, WC46PLSZ5 and WC46PLDZ5
Instruction manual for WC26SSTDZ5, WC46SSTSZ5, WC46SSTDZ5, WC54SSTBC5, WC166SSDZ5 and WC181SSSZ5
Instruction manual for WC18FGBK5, WC32FGDZ5, WC46FGDZ5, WC94FGB5 and WC194FGB5
If you can’t change the temperature on your Wine CellR cabinet, you may have “locked” the cabinet by holding down on the temperature adjustment buttons for too long. To unlock the controls you need to hold and press the '' - '' minus button for 3-5 seconds until your temperature number changes to a letter. This letter has to be '' E ''. If not, change it to that letter by pressing either the plus or minus button until it shows E. Then wait until it goes back to the current temperature display. You can now unlock the panel by pressing the padlock button and then set it to your desired temperature. After a few minutes it will cool it down to what you set it to.
