VintageView

R Series Helix Dual 15 (minimalist wall mounted metal wine rack)

$195.00 - $213.00
In Stock
SKU:
HX-15-D-K

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

The Helix Wine Rack is a wall-mounted wine rack designed to be installed into drywall or hard wood surfaces with a minimum thickness of 1/2” (1.5cm). For concrete, brick or stucco surfaces, use a 3/16” x 1-1/4” masonry screw or #8 x 1-1/4” screw with appropriate size expanding concrete anchor (not includ- ed).

If using an R Series Post System to mount Helix in a floor-to-ceiling application, reference instructions included with Post sections.

Additional Information

STEP 1. MARK MOUNTING LOCATIONS

Reference chart to verify minimum clearance. Place Helix Wine Rack in the desired location, level, and mark the mounting hole locations on the wall (Figure A).

STEP 2. PREDRILL MOUNTING HOLES

Using a 1/16” Bit, drill a pilot hole to confirm if the surface is drywall or wood/stud backed. If drywall is determined, use a 1/2” drill bit to drill mounting holes.

If installing to a wood-backed or stud surface, continue to next step.

Helix Wine Rack Spacing Chart Figure A

Configuration
(bottle position)
From Obstruction
(bottle neck)
From Obstruction
(bottle base)
Overall Width
(from centerline)
Helix Single Depth
(750ml*/1.5L*)
3” (8cm)/3.5”** (9cm) 10” (25.5cm)/12” (30.5cm) 13” (33cm)/15” (38cm)
Helix Double Depth
(750ml/1.5L)
10” (25.5cm)/12” (30.5cm) 10” (25.5cm)/12” (30.5cm) 21” (53.5cm)/23” (58.5cm)

*For 750ml bottles 13” or taller, and for 1.5L bottles 15” or taller, subtract 2” from bottle height to obtain min obstruction from bottle base. **Use for Champagne spacing

Instructions: Helix Wine Rack

STEP 3. INSTALL HELIX

Drywall Surfaces: Remove the expanding nuts from the Toggle Bolts. Insert the bolts through the mounting holes and, with the wings of the nut oriented to fold toward the head of the bolt, thread an expanding nut back onto each bolt until the tip of the bolt starts to protrude from the end of the nut. Hold the strip so the Toggle Bolt aligns with the ½ inch holes and gently push the expanding nut through the wall (Figure B). Ensure that the wings of the expanding nuts have fully expanded on the back side of the wall and tighten the bolts, verifying that the rack remains level.

Wood Surfaces: Insert the wood screw through the mounting holes, and secure using a drill (on low setting to prevent striping) or Philips head screw driver. Verify the rack remains plumb and level before fully tightening.

If installing only one rack, skip to step 5.

[OPTIONAL] STEP 4. STACKING RACKS

Helix Wine Racks are designed to align, vertically, to create custom wine displays of virtually any height. Align the next Helix Wine Rack** above or below the previous rack and repeat steps 1-3.

**For Double Depth Wine Racks, alternate between Standard (VintageView logo faces RIGHT) and Mirror (VintageView logo faces LEFT) models to maintain alternating pattern of bottle depth (Figure C).** 

If you like the alternation pattern and 30” in total height, you would need to replace one Helix Dual Wine Rack 15 with two Helix Dual Wine Rack 5 (mirror) and one Helix Dual Wine Rack 5 (standard).

STEP 5. INSTALL HOLE COVERS

Snap mounting hole covers into the open holes to complete the look (Figure D).

STEP 6. ADD WINE

Preferably the good stuff.

Maintenance and Care

Helix Wine Racks should be regularly inspected for secure wall attachment. Should any fastener be found to be loose, tighten it appropriately.

Helix Wine Racks may be cleaned with a dry cloth. Use rubbing alcohol for any difficult to remove stains. Avoid harsh chemicals and abrasive surfaces as they may damage the finish.

Shipping Information

Rosehill Reserves the right to contact you should shipping charges end up substantially higher than advertised on our website.  You will have an opportunity to cancel your order at that time.

For CAD customers - Shipping Charges for importation, brokerage, duties are extra and might be charged extra, however you will be contact by a Rosehill Customer Service Representative to discuss it further. 

Need Assistance? Contact Us

888-253-6807 Live Chat

Our Reviews

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)