Base/Crown & Molding Kit - Modular Redwood Racks

Please note this is a relatively NEW base system at 1" high.

The previous based was 1½" high.

The base and crown are each 1" high. The base & crown is designed to fit the rack length exactly, so depending on your racking order, you can choose the exact length of finish molding. The base are designed to fit the depth of the racking, the base will be offset from the wall at the back, to mirror the racks above.

Add 2" to your racking layout height if you want to put one section on the top and one section on the bottom. Don't forget to finish off with molding end caps (F23C) if the sides of your racks are visible. You may also want quarter round (F21C) to add extra detail to your molding.

The base kits are faced with redwood. The platform is 1" black melamine to be placed directly on the ground. While the manufacturer, doesn't state anything, we suggest placing a sheet of plastic on top of the floor where the base is to go to act as a moisture barrier.

The height of the face molding is 1 3/16", adjusted to match the base, cover any shims under the base if needed, and overlap the racking.

Once the racks are installed you can't really see through to the melamine and further to that, once you bottles are in place, you definitely can't see through. Unless you want a base that is higher, you can't build a better base for less than our cost.

Please keep in mind that base and crown are not necessary. Your racks can sit right on the ground or you can build your own base using a larger baseboard and crown moulding. The base provides a more finished look to your racks and allows an area to shim for any floor unevenness.

This California Redwood Modular Wine Rack system is ideal for the wine lover who wants a customized wine cellar at a great price!

Modular Redwood Wine Racking Accessories

No other wood wine rack system offers the same price and ease of installation as our modular California Redwood wine racks. The only tool required to assemble these wine racks is a hammer, and to install, a screwdriver. All hardware is included for assembly and installation on the wall.

We strongly suggest using a brad nailer or professional staple gun to put the racks together as opposed to the nails supplied. Using the nails included with the kits may cause unnecessary splitting of the wood. The wine racks must be fastened to the wall - They are NOT freestanding. The installation manuals are available on line, look at the specific racking pages to see the manual

There are NO PLUGS on the front of these racks. A clean look with smooth radius edges for all of the wood makes this modular racking system look and feel professional.

This redwood wine rack system can expand to fill your space and can be added to at any time.

Incredible flexibility of heights

This stackable Modular Wine Rack System is available in 2 heights:

A(32") & B(48") to allow for a number of configurations. The racks are a total of 9" deep. The racks themselves are 6-1/4" deep and the hardware sits them 2-3/4" away from the wall for a total of 9".

Upon stacking the units you can achieve a variety of heights, please see chart above.

You can further enhance your cellar with our Modular Racking accessories:

• Pre-cut Modular Redwood Base & Crown molding Kits can be added to any wine racking configuration. This will add an additional 1" each for height or a possible extra 2" of height.

• All of our Modular Redwood wine racks can be installed double depth to increase bottle capacity (optional brackets required - F19/20C)

We are able to assist with the layout of your wine racks to make your cellar look its best.
We need your help designing so: Click here for assistance in designing your cellar.

For a comparison of Modular California Redwood wine racks, Premium wine rack kits, and custom wine racks. Click here for information.

Shipping prices are indicated in the shopping cart and will be more to your advantage as you order more racks.

If you would like a cooling unit as well shop our wine cellar cooling units.

Modular Redwood Wine Racks are readily available for shipment to destinations within the USA and Canada. Redrack wood wine racks, Modular Redwood Racking are produced and shipped from Mississauga, ON, Ontario, Canada, L5T 1K4 with USA distribution center in Phoenix, AZ, Arizona, United States

Sample pieces to show the color of the redwood.

Assembly & Installation Guides

(F01 / F02 / F03) Individual Bottle Column Wine Racks
(F04) Curved Corner Wine Racks
(F05 / F06 / F07 / F08 / F09) Bin & Case Wood Wine Racks
(F12C) Wine Rack Display Top
(F13C) Hanging Stemware Rack
(F14C - F16C) Base / Crown & Molding
(F17 & F18) Curved Base / Crown & Molding
(F19 / 20C) Double-Deep Brackets
 

NOTE: We strongly suggest using a brad nailer or professional staple gun to put the racks together as opposed to the nails supplied. Using the nails included with the kits may cause unnecessary splitting of the wood.  1" - 1 1/8" finishing nailer.