Evolution Freestanding Wine Rack 72 Base Kit
Description
The Wine Tower 72” Kit is a sleek, freestanding wine rack featuring near-invisible acrylic panels and steel rods, creating a minimalist, contemporary wine display. Perfect for home or commercial settings.
Additional Information
Wine Tower: Modern, Expandable Wine Storage
Designed like a wine-styled bookcase, this label-forward system elegantly showcases bottle labels while offering easy expansion with Extension Kits for increased capacity.
Each extension comes with Wall mounted anchors. While this system is promoted to be freestanding, we strongly suggest that you fasten these units to the wall. (or floor ceiling mount, with optional hardware).
Our extension kits all come with brackets to attach to the wall. Even for the stand alone base unit, we suggest that you fasten the 72†or 92†units to the wall as well.
Evolution Series of Wine Racks also available with Floor Ceiling Mount Frames
The Evolution Series of metal rods is also available with up to 10Floor Ceiling Mount Frames. The floor ceiling mount frame allows you to install racks where you are not able to fasten directly to the wall; like adjacent to glass or on a stone wall. This allows for appearance of floating wine rack ideal for commercial and residential wine cellar projects. The Evolution series divider also lends itself to being a room divider. Please note the maximum span is 4ft, but we can make the width smaller if you prefer.
Need the racks to cover larger space? Install multiple racks adjacent to one another.
Each extension comes with Wall mounted anchors. While this system is promoted to be freestanding, we strongly suggest that you fasten these units to the wall. (or floor ceiling mount, with optional hardware)
Our extension kits all come with brackets to attach to the wall. Even for the stand alone base unit, we suggest that you fasten the 72 units to the wall as well.
The shelf sits on the rods and you just remove the rods above so you can fit boxes or whatever you looking to put on top. They can go anywhere on the tower. The clamp is recommended for all towers.
Here are some good things to know regarding the clamp or securing the tower:
The Wall Clamp will pinch the panel to hold it in place but works best when positioned directly over a Wine Rod.
This relationship between the E1 Wine Rod and E1 Wall clamp is important because if the unit were to tip over the Wine Rod would need to move past the Wall Clamp to do so. So, it is an extra layer of protection besides the clamp pinching the panel:
Keeping the Wall Clamp over the Wine Rod; the maximum distance from the wall to the panels
This means that if the obstruction on the wall protrudes or less where it aligns with the panel; you are good.
Additionally, the max distance between the edge of the panel and the Wine Rod is 3/4
Coupled with the max offset for the clamp, this means that if the obstruction on the wall protrudes or less between panels, you are good.
96and up panels are thicker and require a different clamp, max offset between the panel edge and the wall is
Lastly there was a question about floor anchors. There is the simple solution:
This is an L bracket, they are sold in any hardware store and cost a few bucks. Client would just need to be mindful of the floor material to get the appropriately sized holes for the anchor they want to use. Bracket can be positioned under the unit for minimal visibility. Panel can be drilled in to with a screw at low speed.
Alternatively, there are custom options for floor mounting. We can pre-drill the panels to receive the L-Bracket with nut and bolt combo, we can fuse a flat plate of acrylic at the bottom that can have holes for floor anchors, or we can often create a way to brace the unit from the ceiling.
Shipping Information
Rosehill Reserves the right to contact you should shipping charges end up substantially higher than advertised on our website.You will have an opportunity to cancel your order at that time.
For CAD customers - Shipping Charges for importation, brokerage, duties are extra and might be charged extra, however you will be contact by a Rosehill Customer Service Representative to discuss it further.
Warranty
Spec Sheet - Single Bottle Depth
Spec Sheet - Double Bottle Depth
Spec Sheet - Triple Bottle Depth
Spec Sheet - WW-051 (3-bottle wine rack)
Spec Sheet - WW-052 (2-bottle wine rack)
Spec Sheet - WW-053 (3-bottle wine rack)
Spec Sheet - WW-301 (18-bottle wine rack)
Spec Sheet - WW-302 (36-bottle wine rack)
Spec Sheet - WW-303 (54-bottle wine rack)
Spec Sheet - WW-451 (27-bottle wine rack)
Spec Sheet - WW-452(54-bottle wine rack)
Spec Sheet - WW-453 (81-bottle wine rack)
Spec Sheet - WW-EX151-1C (3-bottle extension)
Spec Sheet - WW-EX152-1C (6-bottle extension)
Spec Sheet - WW-EX153-1C (9-bottle extension)
PRODUCT MANUALS
Get in touch with our design specialists to start building your custom wine cellar today.
